The Teren-DTI-200H flowmeters operate on the ultrasonic pulses transit time difference principle. The great advantage is the mechanical installation, because it is not necessary to cut the pipe. The sensors are simply clamped on the outer pipe surface, for this reason the pressure and the liquid aggressiveness to be measured are not a problem for the flowmeter. The system measures in a bidirectional way and is suitable for clean or slightly dirty liquids.
Measuring Accuracy |
Flowmeter/Calorimeter: Better than 1% ; Water meter: Better than 2%; |
Repeatability |
Better than 0.2% or 0.5% |
Velocity |
±0.03~±105ft/s(±0.01~±32m/s),bi-ditectional |
Flow Type |
Water,sea water,industrial water ,oil liquid,sewage and single liquid available for ultrasonic |
Pipe Material |
Steel,stainless steel,cast iron,copper,PVC,aluminum,glass reinforced plastics or other compact pipe and lined pipe allowed |
Liquid Temp |
32 F~320 F (0 C~160 C) |
Output Interface |
OCT,RS232 |
Battery and Power |
3AAA Ni-H built-in batteries, when fully recharged , it will last over 12 hours of operation. 90V-230VAC for the charger |
Pipe Size |
1/2”~240”(DN15mm~6000mm) |
Housing |
ABS |
Display |
3.5”, 320x240pixel, 65536 colours |
Keypad | 8 pushing buttons |
Clamp-on Transducers |
S1 type-suitable for pipes from DN15 to DN100 (0~70°C) M1 type-suitable for pipes from DN50 to DN800 (0~70°C) L1 type- suitable for pipes from DN300 to DN6000 (0~70°C) |
Clamp-on Transducers Mounted On Metric Frame |
S1F (HS) type-suitable for pipes from DN15 to DN100 (0~70°C) M1F (HM) type-suitable for pipes from DN50 to DN800 (0~70°C) |
Clamp-on Transducers For High Temperature |
S1H type-suitable for pipes from DN15 to DN100 (0~160°C) M1H type-suitable for pipes from DN50 to DN800 (0~160°C) |
Totalizer |
7 digits for positive, negative and net flow |
Data Logger |
Max 16GB SD can store up to 10 years records |